Nose radii designed with minus tolerance
・Suitable for small parts applications that often require minus tolerance dimensions.
・The order number is shown with the letter “M” that indicates minus tolerance.
・The radius value is printed on the side of the insert label for easy recognition.
The screw designed for common use of front and back enables back clamping.
・ aGroove width .012─.118inch (0.3 ─3.0 mm)
・ aProfiling possible
・ ISO E class accuracy inserts
・ A wide variety of small corner R inserts
・ Rake angle 30°
・ The most suitable for swiss style lathes with radial tool posts.
・ The most suitable for machining of small parts with work diameter φ5 mm (.197 inch) or smaller.
・ Single holder responds to front turning, back turning, grooving, threading, and cutting off operations.
Min. cutting diameter φ2.2 mm -
Boring / Grooving / Threading
Min. cutting diameter φ5.0 mm –
Min. cutting diameter φ .39 inch -
・Solid Carbide Drills
Min. cutting diameter φ .468 inch -
・Solid Carbide End Mills
|External Turning||Tools for front turning, back turning, grooving, threading, and cutting off|
|Internal Turning||Tools for boring, internal grooving and internal threading |
|End Milling||End Mills|
|Types of Tool Posts||Gang type, turret type |
|Tool Sizes||Square holder : .375 - .625 inch (8 - 16 mm) |
Round holder : ≤ φ1 inch (φ25.4 mm)
|High Quality||E class tolerance, sharp cutting edge, high accuracy small corner R, smooth surface finish. |
|Long Tool Life||Miracle Coating (VP15TF), cermet(NX2525), cemented carbide (HTi10) |
|High Efficiency||Regrinding not necessary due to the employment of indexable inserts. |
A wide variety of top cutting edge geometries