SRF / SUF

Insert Installation(SRF)

FITTING INSERTS ON HOLDERS(SRF)

1. Clean the insert and insert pocket
Thoroughly clean the insert and the insert pocket on the holder body.

2. Fitting the insert
Place the concave mark on the insert uppermost as shown with the clamp screw inserted from above. Fasten the clamp screw while firmly pressing the insert against the insert pocket wall. Use of a special anti seize lubricant MK1KS is recommended. Tighten at the recommended torque range.

Insert Installation(SUF)

FITTING INSERTS ON HOLDERS(SUF)

1. Clean the insert and insert pocket
Thoroughly clean the insert and the insert pocket on the holder body.

2. Fitting the insert
Place the concave mark on the insert uppermost as shown with the clamp screw inserted from above. Fasten the clamp screw while firmly pressing the insert against the insert pocket wall. Use of a special anti seize lubricant MK1KS is recommended. Tighten at the recommended torque range.

Page Top