MWE / MWS

Operational Guidance for The MWS Drills (Φ.0200"-Φ.1200" & Φ0.50-Φ2.95mm)

MWS

■cautions for use

Please use a fine mesh filter (mesh<3 micron) for coolant to prevent jamming in the oil hole.
For deep drilling with the long type drill, machining a pilot hole is recommended.
(Otherwise, centrifugal forces may cause drill breakage.)

Operational Guidance for The MWS...DB Drill (Φ.125"-Φ.500" & Φ3.0-Φ14.0mm) (L/D>10)

Flat Face Drilling

  • Drilling a blind hole
tec_drilling_operation_mwe_mws_02_en-us.png

Irregular Face Drilling

  • Drilling and breaking through on irregular faces or angles
tec_drilling_operation_mwe_mws_03_en-us.png

Operational Guidance for The MICRO-MWS Drill (Φ.0200"-Φ.1200" & Φ0.50-Φ2.95mm) (L/D>10)

Flat Face Drilling

  • Drilling a blind hole
tec_drilling_operation_mwe_mws_04_en-us.png

Irregular Face Drilling

  • Drilling and breaking through on irregular faces or angles
tec_drilling_operation_mwe_mws_05_en-us.png



Page Top