TAW

Notes on Use

Insert Installation

Loosen insert screw of holder to install insert.
Mesh the insert serration to holder grooves.
Fasten the insert screw using the provided wrench while holding rake face of the insert lightly with your thumb. (Figure 1)
Check that there is no clearance between the insert bottom and holder flute end. (Figure 2)

INSERT INSTALLATION

Note On Insert Replacement

Clean insert guide grooves by blowing air before installing a new insert.
Clean the “slit” underneath the insert on the holder with the provided plate.
Use the provided anti-seize lubricant for lubricating the threads of the insert screw.

Page Top