Medical

HIP-SYSTEM

1. Taper Hole Machining

• IMPACT MIRACLE coating with high heat resistance enables to long tool life.
• Enables high efficiency machining and prevent vibration.
• Possible to machine complex geometries previously difficult to machine.

2. Drilling

• MMS drill offer longer tool life and can be used for Stainless Steels, Titanium Alloy and Co-Cr Alloy.
• Use of internal coolant holes improves the cooling effect.

3. External Turning

• A good balance of wear and fracture resistance for turning Co-Cr Alloy and Titanium Alloy.
• Reduced heat generation with the use of a sharp cutting edge.

4. Profile Machining

• Cutting edge geometry with excellent chipping resistance.
• IMPACT MIRACLE coating with high heat resistance enables to long tool life.

1. VQMHVRB
SMART MIRACLE
1. VQMHVRB SMART MIRACLE

PDF(1.72 MB)
2. MMS Drill
2. MMS Drill

PDF(731.64 KB)
3. VP05RT / VP10RT
FJ / MJ Breaker
3. VP05RT / VP10RT FJ / MJ Breaker

PDF(805.12 KB)
3. RT9005 / RT9010
FJ / MJ Breaker
3. RT9005 / RT9010 FJ / MJ Breaker

PDF(805.12 KB)
4. VF2SB
IMPACT MIRACLE
4. VF2SB IMPACT MIRACLE

PDF(1.64 MB)
4. VF2XLB
IMPACT MIRACLE
4. VF2XLB IMPACT MIRACLE

PDF(1.64 MB)

KNEE-SYSTEM

1. Profile Machining

• A good balance of wear and fracture resistance for machining Co-Cr Alloy and Titanium Alloy.
• “Variable curve” radius cutting edges for difficult-to-cut materials.

1. VF4SVB
Vibration Control
End Mill Series
1. VF4SVB Vibration Control End Mill Series

medical_knee_system_2.png

1. Pocket Machining

• Vibration control geometry for stable machining and a smooth cutting action.
• VFHVRB makes finishing easy !

1. VQMHVRB
SMART MIRACLE
1. VQMHVRB SMART MIRACLE

PDF(1.72 MB)
Page Top

BONE PLATES

1. Drilling+Chamfering

• IMPACT MIRACLE coating with high heat resistance enables to long tool life.
• Possible to machine complex geometries previously difficult to machine.

1. VF2WB
1. VF2WB

SCREWS

1. Deep Hole Drilling

• Promotes smooth chip evacuation.
• Use of internal coolant hole improves cooling.

2. Pocket Machining

• Cutting edge geometry with excellent chipping resistance.
• Small diameter combined with a variety of neck lengths aid in machining of deep cavity and complex parts.

1. MWS
Super long drill
1. MWS Super long drill

1. MS2XL
1. MS2XL

MS2XLB
MS2XLB

1. External Turning&Cut Off

• A good balance of wear and fracture resistance for turning Titanium Alloy and Stainless Steel.
• Reduced heat generation with the use of a sharp cutting edge.

1. Small Tools
VP15TF
1. Small Tools VP15TF

Page Top

SPINE

Side Cutting

• IMPACT MIRACLE coating with high heat resistance enables long tool life.
• Delivers superior vibration resistance for difficult-to-cut materials.

1. Vibration Control
End Mill Series
1. Vibration Control End Mill Series

INSTRUMENT

Rough Milling

• AJX can achieves extra high feed rates for ultimate efficiency in rough machining.
• Wide selection of inserts with high wear and fracture resistance, for general machining operations.

medical_instrument_2.png

1. Deep Hole Drilling

• Promotes smooth chip evacuation.
• Use of internal coolant hole improves cooling.

1. MWS
Super long drill
1. MWS Super long drill

Download Catalog Data Below

PDF Downed
PDF Downed
Page Top