MP9000 / MT9000

icon_s
icon_shiage
icon_middle
icon_rough

9000 Series Grades for Difficult-to-cut Materials

mp_t9000_tit_04.png

mp9005_mp9015_mt9015_main_gl.png

The new high Al-rich (Al,Ti) N single layer coating significantly reduces edge fracturing.

PVD coated grade MP9005 / MP9015 / MP9025

mp_t9000_01_en-gl.png

High Al and Conventional Coating Comparison

The new technology high Al-rich (Al,Ti)N single layer coating provides stabilisation of the high hardness phase and succeeds in dramatically improving wear, crater and welding resistance.

mp_t9000_02_en-gl.png

Carbide grade (Non coated) MT9005 / MT9015

mp_t9000_03_en-gl.png

New Chip Breaker System

Negative inserts

mp_t9000_08_en-us.png

Positive Inserts

mp_t9000_09_en-us.png

New Precision Chip Breaker System

Positive Inserts

mp_t9000_12_en-us.png

Cutting performance

Inconel718, vc=330SFM Continuous Machining

mp_t9000_10_en-us.png

MP9015 with LS breaker was smallest damage.

mp_t9000_11_en-us.png

Chip Control when Back Turning

Non-tangling of chips when back turning Inconel718.

mp_t9000_06_en-us.png

mp_t9000_15_en-us.png

Application Examples

mp_t9000_07_en-us.png

side_banner_cust_en-us.png
side_banner_tech_en-us.png
side_banner_contact_en-us.png
side_banner_fb.png
side_banner_twitter_en-us.png
side_banner_youtube_en-gl.png
Page Top