NEW
icon_k
icon_shiage
icon_middle

CBN Grade for Sintered Alloys and Cast Irons

mb4120_tit.png

mb4120_main.png

Excellent Fracture Resistance and Stable Cutting Improves Productivity

Increasing the CBN particle content and bonding strength makes it suitable for machining various sintered materials.

High Fracture Resistance

Fine CBN particles increase cutting edge toughness.
The high fracture resistance allows stable performance even during interrupted machining.

High Adhesion Strength of Fine CBN Particles

Optimization of the sintering conditions strengthens adhesion between fine CBN particles. This increases both fracture and wear resistance.

A Wide Range of Edge Preparation (Honing) are Available

The SF type offers a sharper cutting edge, leading to the reduction in cutting resistance and burr development and an increase in surface finishes. The SF type is the first recommendation but to increase cutting edge strength and chipping resistance there are also the SE, FS, GS and TS edge preparations.

mb4120_02_en-gl.png

Cutting Performance

Fracture Resistance Comparison During Interrupted Facing of High Strength Sintered Alloy

Increased fracture resistance even during heavy interrupted machining.

mb4120_03_en-us.png

Application Examples

mb4120_04_en-us.png

The above application examples are customer’s applications, so it can be different from the recommended conditions.

side_banner_cust_en-us.png
side_banner_tech_en-us.png
side_banner_contact_en-us.png
side_banner_fb.png
side_banner_twitter_en-us.png
side_banner_youtube_en-gl.png
Page Top