MS plus End Mill Series

icon_p
icon_m
icon_n
icon_s
icon_h
icon_shiage
icon_middle

Carbide end mills

msplus_tit_en-gl.png

msplus_main_gl.png

Tough applications require ''Plus'' performance.

(Al,Ti,Cr)N multilayer coating (MS Plus)

Our original coating technology enables a multilayer of (Al,Ti)N and (Al,Cr)N. It allows machining of a wide range of work materials.

msplus_01_en-us.png

Cutting Performance

Carbon Steel AISI 1050

msplus_06_en-us.png

MP2SDB

Tough carbide substrate with high chipping resistance.
Ideal for semi-finishing of forging dies.

msplus_02_en-us.png

Cutting Performance

Resistance to chipping

MP2SDB shows excellent chipping resistance even at large depths of cut, high feed rates and long overhang applications.

msplus_03_en-us.png

MP2SSB / MP2SB / MP2MB / MP2XLB

Greatly improved wear resistance even when machining hardened materials.

MS plus provides long tool life on materials up to 52HRC.
For steels harder than 52 HRC, IMPACT MIRACLE end mills are recommended.

msplus_02_en.png

msplus_13_en-gl.png

Cutting Performance

Carbon Steel AISI 1050

MS plus gives excellent wear resistance and significantly longer tool life compared to conventional products when machining carbon steel.

Alloy Steel, Tool Steel AISI H13 (52 HRC)

MS plus shows higher wear resistance than conventional products when machining AISI H13(52 HRC).
IMACT MIRACLE is suitable when even longer tool life is required.

side_banner_cust_en-us.png
side_banner_tech_en-us.png
side_banner_contact_en-us.png
side_banner_fb.png
side_banner_twitter_en-us.png
side_banner_youtube_en-gl.png
Page Top