icon_p
icon_m
icon_k
icon_n
icon_s
icon_h
icon_shiage
icon_middle

For Swiss Type Automatic Lathes MS plus End Mill Series

MP2ES_3ES_4EC_tit.png

MP2ES_3ES_4EC_main.png

Fracture Resistance & Burr Reduction to Combat Problems Commonly Encountered with Small Swiss Type Automatic Lathes

Feature

Achieves Stable Machining without Chipping Even when Machining Overuses the Cutting Edge

MP2ES_3ES_4EC_01_en-us.png

(Al, Ti, Cr)N Multilayer Coating (MS plus)

Our original coating technology incorporates a multilayer of (Al, Ti)N and (Al, Cr)N.
It allows machining of a wide range of workpiece materials.

MP2ES_3ES_4EC_02_en-us.png

Cutting Performance

Machining 304 - Comparison of Fracture Resistance

The round, stainless steel bar is machined using a D-cut. The adoption of the high toughness cemented carbide and gash land provides highly improved fracture resistance.

MP2ES_3ES_4EC_03_en-us.png

Machined 304 - Comparison of Burr Generation

The optimized cutting edge shape suppresses the occurrence of burrs.

MP2ES_3ES_4EC_04_en-us.png

Machined 304 - Comparison of Surface Finishes

The surface finish is greatly improved due to the improved chatter resistance.

MP2ES_3ES_4EC_05_en-us.png

Selection of End Mill for Swiss Type Lathe

1.The number of Flutes must be selected according to the type of machining.

MP2ES_3ES_4EC_06_en-us.png

2.Selecting Tools Other Than Small Swiss Type Automatic Lathe End Mills
End Mills with an overall tool length of LF=50 mm or less can be used even with small Swiss Type automatic lathe end mills.
Select the necessary tools according to the workpiece material and machining method (such as every 0.1 or radius).

side_banner_cust_en-us.png
side_banner_tech_en-us.png
side_banner_contact_en-us.png
side_banner_fb.png
side_banner_twitter_en-us.png
side_banner_youtube_en-gl.png
Page Top