DLC4LATB/C4LATB

icon_n
icon_shiage
icon_middle
icon_rough

Taper Ball Nose End Mills for Machining Aluminum Alloy Impellers

c4latb_tit-2.png

c4latb_main-2.png

Rigid Design and New DLC Coated
Type for Reliable, High-Efficiency
Machining of Aluminum Impellers

Feature

Featuring 4 peripheral flutes for strength and rigidity paired with only 2 ball end flutes for superior chip discharge.

c4latb_01_en-us.png

c4latb_04_en-us.png

The uniquely developed DLC coating provides excellent welding resistance during high speed machining and when the coolant supply is reduced. Additionally, the low coefficient of friction reduces cutting resistance.

Application Example

High Efficiency Machining of Aluminum Alloy Impellers

Excellent high depth of cut and feed.

c4latb_02_en-us.png

Cutting Performance

Slotting with a Limited Coolant Flow Rate

Resistance to welding prevents tool breakage when coolant supply is limited due to the geometry of the workpiece.

c4latb_05_en-us.png

This test was performed with a limited coolant flow rate. If the coolant flow rate is sufficient, non-coated end mills can also be used.

A wide range of non-standard shapes are available.

c4latb_03_en-us.png

side_banner_cust_en-us.png
side_banner_tech_en-us.png
side_banner_contact_en-us.png
side_banner_fb.png
side_banner_twitter_en-us.png
side_banner_youtube_en-gl.png
Page Top