FP-Breaker corner R seize expansion

August 31, 2018

Mitsubishi Materials is proud to announce the expansion of FP breaker, with R0.047” (R1.2mm) for ISO turning negative inserts for steel finishing.

New Items

• 7 total MC6015 grades applied to 90, 80, 60, 55, 35 degree insert shapes including trigon shape

• 7 total MC6025 grades applied to 90, 80, 60, 55, 35 degree insert shapes including trigon shape

• 7 total MP3025 grades applied to 90, 80, 60, 55, 35 degree insert shapes including trigon shape

• 7 total NX2525 grades applied to 90, 80, 60, 55, 35 degree insert shapes including trigon shape


Technical Information

• Two special convex shapes and recess geometry

• Good surface finish

• Note: for additional information on the MC6015 & MC6025, please refer to brochure #B196A

• Note: for additional information on the MP3025 & NX2525, please refer to brochure #B203A-F


Applications to Target

• For finish cutting of carbon and alloy steels


Benefits

• One convex shape provides excellent chip control in low feed rates, while the second convex shape offers good chip control of soft steels.

• 20° positive high rake angle provides excellent surface finish.


FP Breaker

Tool News B203A-F(225.32 KB)

Tool News B196A(2.73 MB)

Page Top